Danh mục

Mạch nRF52 DK, Development kit for Bluetooth LE, Bluetooth mesh, ANT and 2.4 GHz applications

Thương hiệu: Nordic Semiconductor
Bảo hành: Cơ bản
Tình trạng: Còn hàng
SKU: HS1768V
GIÁ BÁN: (Mã sản phẩm / SKU có chữ cuối V là hàng CTY giá đã bao gồm thuế)
1.404.000₫

Bảo hành cơ bản

  • Sản phẩm được kiểm tra trước khi bán Sản phẩm được kiểm tra trước khi bán
  • Quý Khách quay video kiểm tra sản phẩm khi nhận hàng Quý Khách quay video kiểm tra sản phẩm khi nhận hàng
  • Thông báo tình trạng lỗi trong 7 ngày kể từ khi nhận hàng Thông báo tình trạng lỗi trong 7 ngày kể từ khi nhận hàng
  • Xử lý lỗi theo chính sách bảo hành

The nRF52 DK is a single-board development kit (DK) for Bluetooth Low Energy, Bluetooth mesh, ANT and 2.4 GHz proprietary applications using the nRF52810 and nRF52832 SoCs. 

It facilitates development exploiting all features of the nRF52810 and the nRF52832 SoCs. It includes an NFC antenna that quickly enables utilization of the NFC-A tag peripheral on the nRF52832. The kit gives access to all I/Os and interfaces via edge connectors and has 4 LEDs and 4 buttons which are userprogrammable. 

The kit is compatible with the Arduino Uno Revision 3 standard, making it possible to use 3rd-party shields that are compatible to this standard. 

It comes with an on-board SEGGER J-Link debugger allowing programming and debugging both the on-board SoC and external SoCs through the debug out header. 

It can be powered by USB or by an external source, but also includes a CR2032 battery holder, enabling in-field testing of prototypes. 

A range of software examples are available from the nRF5 software development kit (SDK) to support Bluetooth LE, ANT and 2.4 GHz applications. For Bluetooth mesh development, check out nRF5 SDK for Mesh. SEGGER Embedded Studio, Keil, GCC and IAR IDEs and toolchains are supported.

KEY FEATURES

  • Affordable, rapid prototyping and development solution for the nRF52810 and nRF52832 SoCs
  • Supports Bluetooth LE, Bluetooth mesh, ANT and 2.4 GHz proprietary development
  • Bluetooth 5 feature support: 2 Mbps, Advertising Extensions and Channel Selection Algoritm #2 (CSA #2)
  • Arm® Cortex™ M4 with floating point support
  • DSP instruction set
  • Arduino Uno Rev. 3 compatible for use with 3rd party shields
  • All I/Os and interfaces are available via connectors
  • Segger J-Link OB programming/debugging supported
  • Support for programming/debugging of external boards
  • Integrated 2.4 GHz PCB antenna
  • NFC antenna
  • Connector for external NFC antenna
  • Connector for RF measurements
  • Pins for power consumption measurements
  • Coin-cell battery holder
  • 1.7-3.6 V supplied from battery, USB or external

APPLICATIONS

  • Internet of Things (IoT)
  • Wearables
  • Appcessories
  • Desktop peripherals
  • Remote controls
  • Sports & medical
  • Smartwatch
  • Smarthome sensors
  • Lighting
  • Toys
  • Industrial sensors
  • A4WP wireless charging
  • Beacons

KIT CONTENT

  • nRF52 DK board
  • 2032 battery
  • NFC antenna

Mạch nRF52 DK, Development kit for Bluetooth LE, Bluetooth mesh, ANT and 2.4 GHz applications

Mạch nRF52 DK, Development kit for Bluetooth LE, Bluetooth mesh, ANT and 2.4 GHz applications

 

Mọi thắc mắc xin Quý Khách nhắn tin qua Zalo OA / Facebook để được hỗ trợ sớm nhất, Hshop xin chân thành cảm ơn!

1. Lưu ý trước khi đặt hàng

Để đảm bảo quyền lợi trong quá trình mua hàng, Quý Khách vui lòng:

  • Tìm hiểu kỹ thông tin và thông số kỹ thuật của sản phẩm trước khi đặt hàng.
  • Đọc kỹ Chính sách Bảo hànhChính sách Đổi/Trả của Hshop.vn.
  • Nếu chưa chắc chắn sản phẩm có phù hợp với nhu cầu sử dụng hoặc hệ thống của mình hay không, Quý Khách vui lòng liên hệ Bộ phận Kỹ thuật Hshop.vn để được tư vấn trước khi đặt hàng.

Lưu ý khi nhận hàng

Khi nhận hàng, Quý Khách vui lòng kiểm tra và mở gói hàng cẩn thận. Để đảm bảo quyền lợi bảo hành, Quý Khách vui lòng quay lại video quá trình bóc hộp và sử dụng lần đầu trong 07 ngày kể từ khi nhận hàng. Video này sẽ là căn cứ để Hshop.vn tiếp nhận và xử lý khiếu nại trong trường hợp sản phẩm phát sinh sự cố.

Quý Khách nên giữ lại đầy đủ vỏ hộp, bao bì, phụ kiện, tài liệu và quà tặng (nếu có) trong tình trạng nguyên vẹn, không rách, không móp méo trong 07 ngày kể từ ngày nhận hàng để đảm bảo điều kiện xử lý đổi/trả trong trường hợp sản phẩm phát sinh lỗi kỹ thuật do nhà sản xuất.

2. Các bước mua hàng Online tại Hshop.vn

Bước 1: Đăng ký và đăng nhập tài khoản

Quý Khách nên Đăng ký tài khoảnĐăng nhập trước khi đặt hàng.

Việc sử dụng tài khoản giúp Quý Khách:

  • Theo dõi và lưu lại lịch sử đơn hàng.
  • Không phải nhập lại thông tin mua hàng trong những lần đặt hàng tiếp theo.

Bước 2: Chọn sản phẩm

Tìm kiếm sản phẩm cần mua, lựa chọn số lượng và các tùy chọn sản phẩm (nếu có), sau đó thêm sản phẩm vào Giỏ hàng.

Bước 3: Kiểm tra Giỏ hàng

Sau khi chọn đầy đủ sản phẩm, truy cập Giỏ hàng để kiểm tra:

  • Tên sản phẩm.
  • Số lượng.
  • Đơn giá.
  • Thành tiền.

Bước 4: Điền thông tin nhận hàng

Quý Khách vui lòng điền đầy đủ và chính xác:

  • Họ và tên.
  • Số điện thoại.
  • Địa chỉ nhận hàng.
  • Phương thức thanh toán.
  • Phương thức giao hàng và các thông tin liên quan khác.

Vui lòng kiểm tra kỹ thông tin trước khi hoàn tất đặt hàng để tránh sai sót trong quá trình giao nhận.

Bước 5: Xác nhận đơn hàng

Sau khi đặt hàng thành công, Quý Khách sẽ nhận được email thông báo đơn hàng. Nhân viên Hshop.vn sẽ liên hệ qua điện thoại để xác nhận đơn hàng, thông tin sản phẩm, phương thức thanh toán và giao nhận trước khi tiến hành xử lý và gửi hàng.

3. Các phương thức thanh toán

Quý Khách có thể thanh toán cho Hshop.vn theo các phương thức sau:

1. Mua hàng và thanh toán trực tiếp tại cửa hàng

Quý Khách có thể đến trực tiếp cửa hàng Hshop.vn để mua hàng và thanh toán tại địa chỉ: 269/20 Lý Thường Kiệt, Phường Phú Thọ, TP.HCM (Địa chỉ cũ: P.15, Q.11, gần ĐHBK TP.HCM)

2. Mua hàng Online và chuyển khoản ngân hàng

Quý Khách có thể đặt hàng Online và chuyển khoản trước qua ngân hàng. Quý Khách chỉ thực hiện chuyển khoản sau khi đã nhận được điện thoại xác nhận đơn hàng từ Hshop.vn. Việc xác nhận trước giúp đảm bảo sản phẩm còn hàng và thông tin đơn hàng, số tiền thanh toán đã được kiểm tra chính xác.

Mọi thắc mắc xin Quý Khách nhắn tin qua Zalo OA / Facebook để được hỗ trợ sớm nhất, Hshop xin chân thành cảm ơn!

Sản phẩm đã xem

Thông số kỹ thuật

The nRF52 DK is a single-board development kit (DK) for Bluetooth Low Energy, Bluetooth mesh, ANT and 2.4 GHz proprietary applications using the nRF52810 and nRF52832 SoCs. 

It facilitates development exploiting all features of the nRF52810 and the nRF52832 SoCs. It includes an NFC antenna that quickly enables utilization of the NFC-A tag peripheral on the nRF52832. The kit gives access to all I/Os and interfaces via edge connectors and has 4 LEDs and 4 buttons which are userprogrammable. 

The kit is compatible with the Arduino Uno Revision 3 standard, making it possible to use 3rd-party shields that are compatible to this standard. 

It comes with an on-board SEGGER J-Link debugger allowing programming and debugging both the on-board SoC and external SoCs through the debug out header. 

It can be powered by USB or by an external source, but also includes a CR2032 battery holder, enabling in-field testing of prototypes. 

A range of software examples are available from the nRF5 software development kit (SDK) to support Bluetooth LE, ANT and 2.4 GHz applications. For Bluetooth mesh development, check out nRF5 SDK for Mesh. SEGGER Embedded Studio, Keil, GCC and IAR IDEs and toolchains are supported.

KEY FEATURES

  • Affordable, rapid prototyping and development solution for the nRF52810 and nRF52832 SoCs
  • Supports Bluetooth LE, Bluetooth mesh, ANT and 2.4 GHz proprietary development
  • Bluetooth 5 feature support: 2 Mbps, Advertising Extensions and Channel Selection Algoritm #2 (CSA #2)
  • Arm® Cortex™ M4 with floating point support
  • DSP instruction set
  • Arduino Uno Rev. 3 compatible for use with 3rd party shields
  • All I/Os and interfaces are available via connectors
  • Segger J-Link OB programming/debugging supported
  • Support for programming/debugging of external boards
  • Integrated 2.4 GHz PCB antenna
  • NFC antenna
  • Connector for external NFC antenna
  • Connector for RF measurements
  • Pins for power consumption measurements
  • Coin-cell battery holder
  • 1.7-3.6 V supplied from battery, USB or external

APPLICATIONS

  • Internet of Things (IoT)
  • Wearables
  • Appcessories
  • Desktop peripherals
  • Remote controls
  • Sports & medical
  • Smartwatch
  • Smarthome sensors
  • Lighting
  • Toys
  • Industrial sensors
  • A4WP wireless charging
  • Beacons

KIT CONTENT

  • nRF52 DK board
  • 2032 battery
  • NFC antenna
Trang chủ nhà sản xuất và hướng dẫn sử dụng.

Mạch nRF52 DK, Development kit for Bluetooth LE, Bluetooth mesh, ANT and 2.4 GHz applications

Mạch nRF52 DK, Development kit for Bluetooth LE, Bluetooth mesh, ANT and 2.4 GHz applications

 

Danh sách so sánh